Home > HARDWARE > LOCKSETS & KEYING SUPPLIES > DOOR LOCK DEADBOLTS > DEADBOLTS - DOUBLE CYLINDER
Sort By:
1
Kwikset 665 Signature Double Cylinder Dead Bolt MBLE HME DEADBOLT DBLE CYL SS MBLE HME DEADBOLT DBL CYL PB
Operated by key outside and inside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. Can be locked or unlocked by key on both sides. Adjustable latch. Can be locked or unlocked by key on both sides. Adjustable latch.
DEADBOLT DOUBLE CYL 6-WAY S/S DEADBOLT DOUBLE CYL 6-WAY PB  DEADBOLT DBL CYL 6-WAY ANT BRS
Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3. Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3. Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3.
DEADBOLT DBL CYL GRADE 2 SATIN DEADBOLT DBL CYL 6-WAY SAT NIC DEADBOLT DBL CYL 6-WAY BRONZE
Operated by key outside and inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through for added security. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-1/4" to 1-13/16" doors. CYLINDER: 6-pin, removable SC1 keyway, solid brass, one piece; re-keys to Schlage.  With 2 nickel plated, solid brass keys. FACEPLATES: 1-1/8 x 2-1/4 STRIKES: 1" x 2-1/4" square corner. BOLT: Solid brass, steel reinforced 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 2 Standards. U.L. Approved 3-Hour Fire Rating. Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3. Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3.
   
 
1